Skip to content
10% OFF HALTECH EP3/DC5 PNP ECUS FOR A LIMITED TIME!
10% OFF HALTECH EP3/DC5 PNP ECUS FOR A LIMITED TIME!

Infinity Design - Honda Civic Type R FK8 Turbo Inlet

£599.00

Factory Turbo Inlet Limitations

The factory FK8 Type R turbo inlet is a single-piece, cast aluminium component with an approximate wall thickness of 5mm. While simple and cost-effective to manufacture, its design presents two significant limitations: thermal performance and airflow restriction.

Positioned directly above the turbocharger and downpipe, the stock inlet is exposed to substantial radiant heat. Aluminium's high thermal conductivity allows heat to transfer readily through the inlet walls, increasing the temperature of the intake air as it passes through. This introduces unnecessary heat into the intake system before the air even reaches the compressor.

The factory inlet is also considerably undersized. Its internal diameter is approximately 25% smaller than the diameter of the factory intake's MAF housing, creating a significant restriction in the airflow path to the turbocharger. This becomes more significant on tuned cars, where higher boost pressure requires greater airflow. The restrictive stock geometry can act as a bottleneck as power levels increase.

Infinity Design Carbon Fibre Turbo Inlet

The Infinity Design carbon fibre turbo inlet has been developed to address these limitations. It starts at the same cross-sectional area as the factory MAF housing and maintains that area all the way to the turbocharger, providing a significantly larger internal volume than the factory turbo inlet. The diameter is deliberately not increased beyond the MAF housing, as the MAF remains the bottleneck in the intake system. Increasing the diameter beyond this point would not remove the existing bottleneck and could introduce unnecessary changes in airflow velocity, potentially leading to flow separation or recirculation. Instead, the focus is on maintaining a consistent cross-sectional area and a smooth internal profile all the way to the turbocharger.

Thermal Performance & Material Benefits

Unlike aluminium, carbon fibre has significantly lower thermal conductivity, meaning it transfers heat much more slowly. This helps reduce heat transfer from the hot surroundings into the air passing through the inlet, helping maintain more consistent intake air temperatures. Combined with its excellent strength-to-weight ratio, carbon fibre provides a lightweight alternative to the factory aluminium component, with improved thermal properties and an internal design better suited to the airflow demands of tuned engines.