Sensors & Accessories

LENGTH: 1.2M (4ft) INCLUDES: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4'/1200mm), Power Supply Cable, Weld-on Bung, Quick...

THREAD: M10 x 1.0 INCLUDES: Includes: Matching plug and pins, M10 x 1.0 to 1/8NPT adaptor. NOTES: Used to measure fluid pressure and temperature Pr...

THREAD: 1/8 NPT INCLUDES: Matching male Deutsch DTM-2 Connector (HT-031000) NOTES: 127 deg C (260 F) Max reading.  

SUITS: For use with up to three CAN devices. INCLUDES: Elite 4 Port CAN hub and Elite CAN cable DTM-4 to DTM-4 - 300mm (12") NOTES: Direct Plug 'n'...

SIZE: 52mm (2") SUITS: Haltech Version 2 CAN bus protocol. INCLUDES: 52mm (2") CAN Gauge, gaugeART CAN Cable to 8 pin Black Tyco - 1.5m (5ft), moun...

LENGTH: 450mm (18") SUITS: 1/8th NPT Thread MAP, Oil and Fuel Pressure sensors. INCLUDES: Fragola -4 AN Hose with Male & Female 1/8th NPT Adapt...

Pops and bangs enabled by a missile toggle switch that you can mount on your dash or hide away in the glove box. The severity of the pops and bangs...

LENGTH: 400mm SUITS: NEXUS Series devices INCLUDES: 1 x DTM-6 to Superseal Pins Harness NOTES: Pre terminated with AMP superseal pin...

LENGTH: 1.2M (4ft) SUITS: NEXUS Series Devices INCLUDES: 1 x HT-010727 NTK to DTM-6 Harness

LENGTH: 1.2M (4ft)

SUITS: NEXUS Series devices INCLUDES: 1 x HT-010726 LSU4.9 to DTM-6 Harness NOTES: Plug'n'Play with NEXUS series harnesses

SUITS: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units. INCLUDES: 1 x NTK LZA08-H5 Wideband Sensor - modified NOTES: Genuine NTK sen...

SUITS: NEXUS Series devices INCLUDES: 1 x NTK LZA08-H5 Sensor, 1 x HT-010727 - NTK to DTM-6 Harness, 1 x Weldable Bung NOTES: Plug'n'Play wit...

LENGTH: 1.2M (4ft) SUITS: Platinum, Elite and NEXUS Series ECUs INCLUDES: Dual Channel, CAN Wideband Controller, 2x NTK Sensor, CAN Cable (4'/...

LENGTH: 1.2M (4ft) SUITS: Platinum, Elite and NEXUS Series ECUs INCLUDES: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4'/1...

SUITS: NEXUS Series INCLUDES: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness, 1 x Weldable Bung NOTES: Plug and Play with NEXUS S...

OUTPUTS: Filters a resistive signal for use with an Analogue Voltage Input (AVI). INCLUDES: HT-031016 - Matching Set of Deutsch DTM 4 Connectors.  

OUTPUTS: Converts a PWM Output to 0-5v Analogue Signal. SUITS: e.g for use with Evo 10 AWD controller. INCLUDES: HT-031016 - Matching Set of Deutsc...

OUTPUTS: 1 x Coil Negative emulated signal INCLUDES: Matching Set of DTM 4 Connector plug and pins NOTES: Requires Spare DPO on ECU  

LENGTH: 300mm OUTPUTS: 0V to 12V Pulsed Output SUITS: Applications that require a digital speed signal INCLUDES: Includes: GPS Speed Input Module &...

SUITS: 8mm (5/16") mounting bolt. INCLUDES: Matching plug and 2 pins.  

INCLUDES: Triple panel, yellow and red adjustment knobs and 3 x 12 position rotary trim modules.  

INCLUDES: Dual panel, yellow adjustment knob and 2 x 12 position rotary trim modules.  

INCLUDES: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014)

SIZE: 8mm D-Shaft SUITS: CW & CCW Rotation INCLUDES: Matching Set of Deutsch DTM-3 Connectors (HT-031014)  

THREAD: 1/8 NPT 27TPI INCLUDES: Matching Bosch EV1 plug & pins. NOTES: 150 deg C (302 F) Max reading.  

THREAD: 1/8 NPT 27TPI INCLUDES: Matching male Deutsch DTM-2 Connector (HT-031000) NOTES: 127 deg C (260 F) Max reading.  

THREAD: 3/8 NPT 18TPI INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

THREAD: M12 x 1.5 INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

THREAD: 1/4 NPT SUITS: Nissan Z32 300ZX intake. INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

THREAD: 3/8 NPT 18TPI INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

THREAD: M14 x 1.5 INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport Pressure sensors must not be mounted directly into the fuel rail or en...

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport Pressure sensors must not be mounted directly into the fuel rail or en...

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins.  

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel r...

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel r...

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel r...

SUITS: GM Flex Fuel Sensors. INCLUDES: Two fittings.  

SUITS: 3/8 "GM Spring Lock" fittings. INCLUDES: Matching plug and 3 pins.  

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they m...

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they m...

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they m...

INCLUDES: Matching male Deutsch DTM-3 Connector (HT-031001)  

INCLUDES: Matching male Deutsch DTM-3 Connector (HT-031001)  

THREAD: 1/8 NPT INCLUDES: Matching plug and pins, -4 AN & 5mm hosetail adaptors. NOTES: "TI" MAP sensors must not be mounted directly to the in...

SUITS: HT-010110 - 5 Bar TI MAP Sensor HT-010138 - 5 Bar Motorsport MAP Sensor HT-010130 - 7 Bar TI MAP Sensor HT-010904 - 150 PSI TI Pressure Sens...

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors. NOTES: "TI" MAP sensors must not be mounted directly ...