Skip to content

Filters

Haltech

Haltech

As a UK dealer for the Haltech range of ECU's and control systems we are able to supply and support any of their products.

Call us for pricing and details on anything that isn't listed.

Website - https://www.haltech.com/

 

ECU COMPARISON

  • Haltech - WB1 NTK Single Channel CAN O2 Wideband Controller Kit
    £424.00

    Haltech - WB1 NTK Single Channel CAN O2 Wideband Controller Kit

    LENGTH: 1.2M (4ft) SUITS: Platinum, Elite and NEXUS Series ECUs INCLUDES: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4'/1...

    View full details
    £424.00
  • Haltech - LSU4.9 Wideband Hardware Pack
    £141.00

    Haltech - LSU4.9 Wideband Hardware Pack

    SUITS: NEXUS Series INCLUDES: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness, 1 x Weldable Bung NOTES: Plug and Play with NEXUS S...

    View full details
    £141.00
  • HALTECH TMS-4 Tyre Monitoring System (Internal Sensors)
    £179.00

    HALTECH TMS-4 Tyre Monitoring System (Internal Sensors)

    SUITS: Haltech Nexus and Elite ECU's using NSP and ESP Software INCLUDES: 1 x Haltech TMS-4 Receiver 1 x TE Mcon to DTM-4 CAN Cable 4 x Inter...

    View full details
    £179.00
  • HALTECH TMS-4 Tyre Monitoring System (External Sensors)
    £179.00

    HALTECH TMS-4 Tyre Monitoring System (External Sensors)

    SUITS: Haltech Nexus and Elite ECU's using NSP and ESP Software INCLUDES: 1 x Haltech TMS-4 Receiver 1 x TE Mcon to DTM-4 CAN Cable 4 x Externa...

    View full details
    £179.00
  • Haltech - CAN Keypad 15 button (3x5)
    £364.00

    Haltech - CAN Keypad 15 button (3x5)

    THREAD: M6 INCLUDES: 1 x 15 Button Keypad (3x5), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x Mounting Nut a...

    View full details
    £364.00
  • Haltech - CAN Keypad 8 button (2x4)
    £304.00

    Haltech - CAN Keypad 8 button (2x4)

    SUITS: Haltech NSP compatible devices INCLUDES: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Lab...

    View full details
    £304.00
  • NEXUS R5 + Universal Wire-in Harness Kit
    £4,078.00

    NEXUS R5 + Universal Wire-in Harness Kit

    LENGTH: 2.5m (8') SUITS: Racing application where advanced race features, data logging and power management control is required.  INCLUDES: NEXUS R...

    View full details
    £4,078.00
  • NEXUS R5 + Plug and Pin Set
    £3,758.00

    NEXUS R5 + Plug and Pin Set

    SUITS: Racing application where advanced race features, data logging and power management control is required. INCLUDES: NEXUS R5 VCU, SurLok conne...

    View full details
    £3,758.00
  • Nexus R5 VCU
    £3,594.00

    Nexus R5 VCU

    OUTPUTS: Up to 18 injector and 12 ignition SUITS: Racing application where advanced race features, data logging and power management control is req...

    View full details
    £3,594.00
  • Fuel Level Sender Signal Conditioner
    £73.00

    Fuel Level Sender Signal Conditioner

    OUTPUTS: Filters a resistive signal for use with an Analogue Voltage Input (AVI). INCLUDES: HT-031016 - Matching Set of Deutsch DTM 4 Connectors.  

    £73.00
  • Analogue Output Adaptor
    £91.00

    Analogue Output Adaptor

    OUTPUTS: Converts a PWM Output to 0-5v Analogue Signal. SUITS: e.g for use with Evo 10 AWD controller. INCLUDES: HT-031016 - Matching Set of Deutsc...

    View full details
    £91.00
  • Tacho Output Adaptor
    £73.00

    Tacho Output Adaptor

    OUTPUTS: 1 x Coil Negative emulated signal INCLUDES: Matching Set of DTM 4 Connector plug and pins NOTES: Requires Spare DPO on ECU  

    £73.00
  • Knock Sensor - Genuine Bosch
    £91.00

    Knock Sensor - Genuine Bosch

    SUITS: 8mm (5/16") mounting bolt. INCLUDES: Matching plug and 2 pins.  

    £91.00
  • Triple Switch Panel Kit
    £245.00

    Triple Switch Panel Kit

    INCLUDES: Triple panel, yellow and red adjustment knobs and 3 x 12 position rotary trim modules.  

    £245.00
  • Dual Switch Panel Kit
    £170.00

    Dual Switch Panel Kit

    INCLUDES: Dual panel, yellow adjustment knob and 2 x 12 position rotary trim modules.  

    £170.00
  • 12 Position Rotary Trim Module (Boost/Fuel/Ign etc)
    £67.00

    12 Position Rotary Trim Module (Boost/Fuel/Ign etc)

    INCLUDES: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014)

    £67.00
  • Throttle Position Sensor - Motorsport Contactless
    £179.00

    Throttle Position Sensor - Motorsport Contactless

    SIZE: 8mm D-Shaft SUITS: CW & CCW Rotation INCLUDES: Matching Set of Deutsch DTM-3 Connectors (HT-031014)  

    £179.00
  • Coolant Temp Sensor
    £40.00

    Coolant Temp Sensor

    THREAD: 1/8 NPT 27TPI INCLUDES: Matching male Deutsch DTM-2 Connector (HT-031000) NOTES: 127 deg C (260 F) Max reading.  

    £40.00
  • Coolant Temp Sensor - Large Thread
    £40.00

    Coolant Temp Sensor - Large Thread

    THREAD: 3/8 NPT 18TPI INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

    £40.00
  • Coolant Temp Sensor - Small Thread
    £40.00

    Coolant Temp Sensor - Small Thread

    THREAD: M12 x 1.5 INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

    £40.00
  • Air Temp Sensor
    £40.00

    Air Temp Sensor

    THREAD: 1/4 NPT SUITS: Nissan Z32 300ZX intake. INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

    £40.00
  • Air Temp Sensor - Large Thread
    £40.00

    Air Temp Sensor - Large Thread

    THREAD: 3/8 NPT 18TPI INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

    £40.00
  • Air Temp Sensor - Small Thread
    £40.00

    Air Temp Sensor - Small Thread

    THREAD: M14 x 1.5 INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

    £40.00
  • Flex Fuel Composition Sensor
    £179.00

    Flex Fuel Composition Sensor

    SUITS: 3/8 "GM Spring Lock" fittings. INCLUDES: Matching plug and 3 pins.  

    £179.00