Haltech

With the Rebel LS, all the hard work is done. It is the best, quickest, and easiest way to get your LS-swap up and running! ECU designed from th...

ECU OVERVIEW The Elite 550 is a simple yet powerful ECU ideal for basic 4 to 8-cylinder or 1-2-rotor engine applications. Suitable for either natur...

HARNESS OVERVIEW Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of VCU connectors at o...

Plug and Pins Only AMP 34 Pin 4 Row 3 Key Superseal Plug and pins only AMP 34 pin 4 Row 4 Key Superseal Plug and pins only - Male Deutsch DTP-06-4S...

VCU OVERVIEW Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller and a state-of-the art engine...

LENGTH: 400mm SUITS: NEXUS Series devices INCLUDES: 1 x DTM-6 to Superseal Pins Harness NOTES: Pre terminated with AMP superseal pin...

LENGTH: 1.2M (4ft) SUITS: NEXUS Series Devices INCLUDES: 1 x HT-010727 NTK to DTM-6 Harness

LENGTH: 1.2M (4ft)

SUITS: NEXUS Series devices INCLUDES: 1 x HT-010726 LSU4.9 to DTM-6 Harness NOTES: Plug'n'Play with NEXUS series harnesses

SUITS: NEXUS Series devices and NTK WB1+WB2 CAN Wideband units. INCLUDES: 1 x NTK LZA08-H5 Wideband Sensor - modified NOTES: Genuine NTK sen...

SUITS: NEXUS Series devices INCLUDES: 1 x NTK LZA08-H5 Sensor, 1 x HT-010727 - NTK to DTM-6 Harness, 1 x Weldable Bung NOTES: Plug'n'Play wit...

LENGTH: 1.2M (4ft) SUITS: Platinum, Elite and NEXUS Series ECUs INCLUDES: Dual Channel, CAN Wideband Controller, 2x NTK Sensor, CAN Cable (4'/...

LENGTH: 1.2M (4ft) SUITS: Platinum, Elite and NEXUS Series ECUs INCLUDES: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4'/1...

SUITS: NEXUS Series INCLUDES: 1 x Bosch LSU 4.9 Sensor, 1 x HT-010726 - Adaptor Harness, 1 x Weldable Bung NOTES: Plug and Play with NEXUS S...

SUITS: Haltech Nexus and Elite ECU's using NSP and ESP Software INCLUDES: 1 x Haltech TMS-4 Receiver 1 x TE Mcon to DTM-4 CAN Cable 4 x Inter...

SUITS: Haltech Nexus and Elite ECU's using NSP and ESP Software INCLUDES: 1 x Haltech TMS-4 Receiver 1 x TE Mcon to DTM-4 CAN Cable 4 x Externa...

THREAD: M6 INCLUDES: 1 x 15 Button Keypad (3x5), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Label Set, 1 x Mounting Nut a...

SUITS: Haltech NSP compatible devices INCLUDES: 1 x 8 button keypad (2x4), 1 x Adaptor Harness DT-4 to DTM-4, 1 x DTM to DTM Cable -1200mm, 1 x Lab...

LENGTH: 2.5m (8') SUITS: Racing application where advanced race features, data logging and power management control is required.  INCLUDES: NEXUS R...

SUITS: Racing application where advanced race features, data logging and power management control is required. INCLUDES: NEXUS R5 VCU, SurLok conne...

OUTPUTS: Up to 18 injector and 12 ignition SUITS: Racing application where advanced race features, data logging and power management control is req...

OUTPUTS: Filters a resistive signal for use with an Analogue Voltage Input (AVI). INCLUDES: HT-031016 - Matching Set of Deutsch DTM 4 Connectors.  

OUTPUTS: Converts a PWM Output to 0-5v Analogue Signal. SUITS: e.g for use with Evo 10 AWD controller. INCLUDES: HT-031016 - Matching Set of Deutsc...

OUTPUTS: 1 x Coil Negative emulated signal INCLUDES: Matching Set of DTM 4 Connector plug and pins NOTES: Requires Spare DPO on ECU  

SUITS: 8mm (5/16") mounting bolt. INCLUDES: Matching plug and 2 pins.  

INCLUDES: Triple panel, yellow and red adjustment knobs and 3 x 12 position rotary trim modules.  

INCLUDES: Dual panel, yellow adjustment knob and 2 x 12 position rotary trim modules.  

INCLUDES: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014)

SIZE: 8mm D-Shaft SUITS: CW & CCW Rotation INCLUDES: Matching Set of Deutsch DTM-3 Connectors (HT-031014)  

THREAD: 1/8 NPT 27TPI INCLUDES: Matching male Deutsch DTM-2 Connector (HT-031000) NOTES: 127 deg C (260 F) Max reading.  

THREAD: 3/8 NPT 18TPI INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

THREAD: M12 x 1.5 INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

THREAD: 1/4 NPT SUITS: Nissan Z32 300ZX intake. INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

THREAD: 3/8 NPT 18TPI INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

THREAD: M14 x 1.5 INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

SUITS: 3/8 "GM Spring Lock" fittings. INCLUDES: Matching plug and 3 pins.