Products

INCLUDES: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014)

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel r...

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they m...

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport Pressure sensors must not be mounted directly into the fuel rail or en...

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins.  

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel r...

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport Pressure sensors must not be mounted directly into the fuel rail or en...

INCLUDES: Matching male Deutsch DTM-3 Connector (HT-031001)  

PRODUCT DESCRIPTION The NXG Performance unit utilises a super-strong EN24T end plate and houses 3J Driveline's own design of plate pack which alwa...

INCLUDES: Matching male Deutsch DTM-3 Connector (HT-031001)  

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors. NOTES: "TI" MAP sensors must not be mounted directly ...

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they m...

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they m...

THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel r...

THREAD: 1/8 NPT INCLUDES: Matching plug and pins, -4 AN & 5mm hosetail adaptors. NOTES: "TI" MAP sensors must not be mounted directly to the in...

  We are able to remap the Apexi Power FC ECUs   List of supported ECUs is below: Make Power FC Part Number Model Serial No. (PFC) Compatibility...

Custom remapping of factory ECU's. No aftermarket ECU's or harnesses required! Remapping the factory ECU's for the Euro R as well as many other ...

THREAD: 1/4 NPT SUITS: Nissan Z32 300ZX intake. INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

THREAD: 1/8 NPT INCLUDES: Matching male Deutsch DTM-2 Connector (HT-031000) NOTES: 127 deg C (260 F) Max reading.  

THREAD: 3/8 NPT 18TPI INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

THREAD: M14 x 1.5 INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.  

AIRTEC’s huge front mount intercooler upgrade for the new Honda Civic Type R FK2 Dyno proven to show a huge reduction in charge temps over standard...

A direct replacement for the original, the functional vents actively help to pull warm air from the back of the radiator, down under the engine and...

A direct replacement for the original, the functional vents actively help to pull warm air from the back of the radiator, down under the engine and...

A direct replacement for the original, the functional vents actively help to pull warm air from the back of the radiator, down under the engine and...

This auxiliary radiator/turbo cooler fits neatly behind the off-side fog light and comes with our bespoke CAD-modelled air duct that replaces the ...

As part of our expanding Honda Civic platform product range, AIRTEC Motorsport is proud to launch our big boost pipe kit for the FL5 Type R suitabl...

IRTEC Motorsport big boost pipe kit for the Honda Civic Type R FK2. Complete with 3 hard pipes and 4 silicon hoses. Please note: Known to fit only ...

AIRTEC Motorsport De-Cat Downpipe for Honda Civic FK8 Type R By removing the original & restrictive catalytic converter in the OEM factory down...

AIRTEC Motorsport Enlarged Induction Pipe for Honda Civic FK8 Type R A direct replacement part that offers increases in performance and response as...

AIRTEC Motorsport Front Mount Intercooler for Honda Civic FK8 Type R In order to ensure there is no noticeable loss in performance during extended ...

Our solution to increasing the intercooler’s size and performance is based upon a core design that is wider, taller and deeper. This offers a massi...

  WILL NOT FIT LEFT HAND DRIVE MODELS.  After a long development process, we’re proud to launch our front mount intercooler upgrade kit designed ...

The gearbox oil cooler kit has been designed to help cool the transmission and also helps remove heat from the engine’s cooling system, which reduc...

A direct replacement for the original plastic tank, the AIRTEC Motorsport header tank is made from lightweight aluminium and comes in a high qualit...

As part of our expanding Honda Civic FK8 Type R product range, AIRTEC Motorsport is proud to launch our induction kit suitable for track or fast ro...

Featuring a large, cotton filter that’s protected from heat within the engine bay by a laser-cut shield that seals against the bonnet, the original...

AIRTEC Motorsport Induction Kit for Nissan Juke Nismo RS As part of our expanding Nissan Juke Nismo RS product range, AIRTEC Motorsport is proud to...

AIRTEC’s huge front mount intercooler upgrade for the new Honda Civic Type R FK2 Dyno proven to show a huge reduction in charge temps over standard...

Our external oil cooler kit has been designed to neatly fit behind the near-side fog light and comes with our bespoke CAD-modelled air duct that r...

AIRTEC Motorsport Oil Cooler Kit for Honda Civic FK8 Type R As part of our expanding Honda Civic FK8 Type R product range, AIRTEC Motorsport is pro...

As part of our expanding Honda platform product range, AIRTEC Motorsport is proud to launch our external oil cooler kit for the FL5 Civic Type R, s...

Oil catch cans are vital preventative additions to ensure the performance and efficiency of Direct Injection engines doesn’t deteriorate over time ...

Finished in special edition Type R anodised red, the heavy duty mount is machined from billet alloy and is offered with three different grades of b...

As part of our expanding Honda product range, AIRTEC Motorsport is proud to launch our uprated torque mount. Upgrading the original torque mount re...

Following an extensive development process, AIRTEC Motorsport are proud to launch our auxiliary turbo radiator kit aimed at modified Civic FL5 Type...

OUTPUTS: Converts a PWM Output to 0-5v Analogue Signal. SUITS: e.g for use with Evo 10 AWD controller. INCLUDES: HT-031016 - Matching Set of Deutsc...

ASNU Performance Injectors ASNU have over 30 years of experience with injectors from all the various injector manufacturers worldwide. ASN...