Filters
Haltech
As a UK dealer for the Haltech range of ECU's and control systems we are able to supply and support any of their products.
Call us for pricing and details on anything that isn't listed.
Website - https://www.haltech.com/
ECU COMPARISON
-
£4,078.00
NEXUS R5 + Universal Wire-in Harness Kit
LENGTH: 2.5m (8') SUITS: Racing application where advanced race features, data logging and power management control is required. INCLUDES: NEXUS R...
View full details£4,078.00Sale -
£3,758.00
NEXUS R5 + Plug and Pin Set
SUITS: Racing application where advanced race features, data logging and power management control is required. INCLUDES: NEXUS R5 VCU, SurLok conne...
View full details£3,758.00Sale -
£3,594.00
Nexus R5 VCU
OUTPUTS: Up to 18 injector and 12 ignition SUITS: Racing application where advanced race features, data logging and power management control is req...
View full details£3,594.00Sale -
£73.00
Fuel Level Sender Signal Conditioner
OUTPUTS: Filters a resistive signal for use with an Analogue Voltage Input (AVI). INCLUDES: HT-031016 - Matching Set of Deutsch DTM 4 Connectors.
£73.00Sale -
£91.00
Analogue Output Adaptor
OUTPUTS: Converts a PWM Output to 0-5v Analogue Signal. SUITS: e.g for use with Evo 10 AWD controller. INCLUDES: HT-031016 - Matching Set of Deutsc...
View full details£91.00Sale -
£73.00
Tacho Output Adaptor
OUTPUTS: 1 x Coil Negative emulated signal INCLUDES: Matching Set of DTM 4 Connector plug and pins NOTES: Requires Spare DPO on ECU
£73.00Sale -
£109.00
GPS Speed Input Module
LENGTH: 300mm OUTPUTS: 0V to 12V Pulsed Output SUITS: Applications that require a digital speed signal INCLUDES: Includes: GPS Speed Input Module &...
View full details£109.00Sale -
£91.00
Knock Sensor - Genuine Bosch
SUITS: 8mm (5/16") mounting bolt. INCLUDES: Matching plug and 2 pins.
£91.00Sale -
£245.00
Triple Switch Panel Kit
INCLUDES: Triple panel, yellow and red adjustment knobs and 3 x 12 position rotary trim modules.
£245.00Sale -
£170.00
Dual Switch Panel Kit
INCLUDES: Dual panel, yellow adjustment knob and 2 x 12 position rotary trim modules.
£170.00Sale -
£67.00
12 Position Rotary Trim Module (Boost/Fuel/Ign etc)
INCLUDES: 2 position decals and matching set of Deutsch DTM 3 connectors (HT-031014)
£67.00Sale -
£179.00
Throttle Position Sensor - Motorsport Contactless
SIZE: 8mm D-Shaft SUITS: CW & CCW Rotation INCLUDES: Matching Set of Deutsch DTM-3 Connectors (HT-031014)
£179.00Sale -
£73.00
Oil Temperature sensor High Range
THREAD: 1/8 NPT 27TPI INCLUDES: Matching Bosch EV1 plug & pins. NOTES: 150 deg C (302 F) Max reading.
£73.00Sale -
£40.00
Coolant Temp Sensor
THREAD: 1/8 NPT 27TPI INCLUDES: Matching male Deutsch DTM-2 Connector (HT-031000) NOTES: 127 deg C (260 F) Max reading.
£40.00Sale -
£40.00
Coolant Temp Sensor - Large Thread
THREAD: 3/8 NPT 18TPI INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.
£40.00Sale -
£40.00
Coolant Temp Sensor - Small Thread
THREAD: M12 x 1.5 INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.
£40.00Sale -
£40.00
Air Temp Sensor
THREAD: 1/4 NPT SUITS: Nissan Z32 300ZX intake. INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.
£40.00Sale -
£40.00
Air Temp Sensor - Large Thread
THREAD: 3/8 NPT 18TPI INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.
£40.00Sale -
£40.00
Air Temp Sensor - Small Thread
THREAD: M14 x 1.5 INCLUDES: Matching Delphi plug and pins. NOTES: 127 deg C (260 F) Max reading.
£40.00Sale -
£179.00
Flex Fuel Composition Sensor
SUITS: 3/8 "GM Spring Lock" fittings. INCLUDES: Matching plug and 3 pins.
£179.00Sale -
£179.00
250 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport Pressure sensors must not be mounted directly into the fuel rail or en...
View full details£179.00Sale -
£179.00
150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport Pressure sensors must not be mounted directly into the fuel rail or en...
View full details£179.00Sale -
£249.00
2000 PSI Honeywell Brake/Nitrous Pressure Sensor
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins.
£249.00Sale -
£179.00
500 PSI "TI" Pressure Sensor
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel r...
View full details£179.00Sale -
£179.00
250 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel r...
View full details£179.00Sale -
£179.00
150 PSI "TI" Fuel/Oil/Wastegate Pressure Sensor
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN adaptor. NOTES: "TI" Pressure sensors must not be mounted directly into the fuel r...
View full details£179.00Sale -
£46.00
Flex Fuel Fittings 3/8 "GM Spring Lock" -6AN Male
SUITS: GM Flex Fuel Sensors. INCLUDES: Two fittings.
£46.00Sale -
£179.00
50 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they m...
View full details£179.00Sale -
£214.00
5 Bar Motorsport MAP Sensor (Stainless Steel Diaphragm)
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they m...
View full details£214.00Sale -
£179.00
150 PSI Motorsport Fuel/Oil/Wastegate Pressure Sensor (Stainless Steel Diaphragm)
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins. NOTES: Motorsport MAP sensors must not be mounted directly to the inlet manifold, they m...
View full details£179.00Sale -
-
-
£214.00
5 Bar "TI" MAP Sensor
THREAD: 1/8 NPT INCLUDES: Matching Delphi plug and 3 pins, -4 AN & 5mm hosetail adaptors. NOTES: "TI" MAP sensors must not be mounted directly ...
View full details£214.00Sale -
£214.00
7 Bar "TI" MAP Sensor
THREAD: 1/8 NPT INCLUDES: Matching plug and pins, -4 AN & 5mm hosetail adaptors. NOTES: "TI" MAP sensors must not be mounted directly to the in...
View full details£214.00Sale -
£13.00
Plug and Pins Only - Delphi 3 Pin Pressure Sensor Connector
SUITS: HT-010110 - 5 Bar TI MAP Sensor HT-010138 - 5 Bar Motorsport MAP Sensor HT-010130 - 7 Bar TI MAP Sensor HT-010904 - 150 PSI TI Pressure Sens...
View full details£13.00Sale -
£31.00
CAN Adaptor Loom DTM-4 to Minifit Jr
SUITS: Haltech iC-7 and Microtech ECUs INCLUDES: 1 x HT-130049 Can Adaptor Loom NOTES: Use with Microtech CAN Hub for direct plug and play
£31.00Sale